Pressurized Solar Water Heater
Working Principle
The no toxic liquid inside the copper heat pipe used in solar water heaters has boiling point of only 250c. So when the heat pipe is heated above 250c, the liquid vaporizes. The vapor rapidly rise to the top of the heat pipe transferring the heat to the cold water inside the tank. As heat is lost at the condenser top, the vapor condenses to form a liquid and returns to the bottom of the heat pipe to repeat the process. Each heat pipe is tested at 2500c. For this reason the copper heat pipe is relatively soft. Because of high temperature, the glass tube is given a three layer coating. Given a strict quality control and high copper purity, the life expectancy of the heat pipe is even longer than that of solar tube.
WIN-HOT AUX PRO SERIES
Salient Features
- Inner tank made from premium grade stainless steel ( SS 304 L) ensures a long-lasting life
- A Product from ISO 9001: 2015 Certified Company
- Save on electricity and fuel charges
- Advanced technology at a competitive rate
- High-quality PUF insulation to minimize heat loss of stored water
- Compact size and lightweight, easy to install and transport
- 3 layered vacuum tubes are made from Borosilicate to minimize heat loss and for maximum heat absorption
- Does not require an air vent
5 years warranty *
WIN-HOT PLUS SERIES
Salient Features
- Generates hot water without any fuel or electricity.
- High Quality vacuum tubes made from borosilicate to minimize the heat loss
- Inner Tank – SS 304L tank with Pre-Coated GI cladding.
- High quality PUF insulation minimizes the heat loss for water inside the tank.
- ISI Electric back up heater (optional to the customer).
- Available capacities-150,200,250,300,500LPD.
WIN-HOT ZA SERIES
Salient Features
- Inner tank made from premium grade stainless steel ( SS 304 L) to get long life
- Generates hot water without electricity or any other fuel
- High quality vacuum tubes to minimize heat loss
- Type of Thermal Insulation – Polyurethane Foam (PUF)
- 3 layered borosilicate tubes for maximum heat absorption
- Evacuated Glass Tube with absorber coating.
- Fitted with Sacrificial Anode
- Absorber coating – AlN-SS-Cu coating
- Zn Al outer coating for supreme corrosion protection.
- Operating Pressure – Max 0.4 kg/cm2
- ISI Electric backup heater (optional to the customer)
- Available Capacities – 100,150,200,250,300 LPD
- Huge saving on electricity and fuel charges
WIN-HOT ECO AUX SERIES
Salient Features
- Inner tank made from premium grade stainless steel ( SS 304 L) to get long life
- High density PUF insulation minimises the heat loss of water inside the tank
- Sacrificial Anodic Corrosion protection for long life
- Negligible scaling of tube
- Easy to install and transport
- Works even OHT height upto 10 meter
- High quality 3 layered vacuum tubes made from Borosilicate to minimize heat loss and for maximum heat absorption
- ISI Electric back up heater (optional to the customer)
- Generates hot water without electricity or any other fuel
- SS 304L tank with pre-coated GI cladding
- Compact size, low height, light weight
- Advanced technology at competitive rate
- Does not require airvent
Brands
Sunflame Energy Consultant, Was started in year 2004, on modest and very limited resources in order to save energy, selling of solar water heater, solar lighting and water level controller, Today one of the leading supplier in belagavi.
Address
CTS 326,Shree Homes Apartment, Roy Road, Near 1st Railway Gate, Tilakwadi,Belgaum-590006, Karnataka.
Phone:+91 831-2400129
Mobile: +91 94485 78245
Email:sunflameenergy@rediffmail.com
© 2022 sunflameenergyconsultant.com